Видео

great guide thank you

5yrs later,im back.Time to clean them again. Thanks again for hanging around. Hope your well. See ya in 5.😊 6.29.24

Your video saved me a bunch of time and possibly throwing away an old chair base. Thanks!

Use plier and Stretch out by sides is more easy way to

I'm not having much luck getting these appart

Bro please come back 🎉

Thanks for the vid m8, made my 4:30 am 'adventure' a lot easier

i started to do mine, i felt the screwdrivers were probably not great for this task, in that moment i thought my chair that i need daily need specials casters so i wasnt willing to risk anything . instead i started using a door panel puller to wedge on one side for additional surface spread on the force and tried using 2 brake adjustment like tools to pry- i stopped as i think i just want new bigger wheels on my chair and popped wheel off discovering i can use standard wheels so im getting 3 inch wheels instead

I have tried different tutorials on yt but this tutorial worked for me Thank you!

hello I just wanted to say thank you for your very helpful video! shocking how much hair string and gunk those wheels can hold!!!

I was just not able to remove the wheels. Your video gave me CORRECT way to remove the wheel and clean the castor. It does shoot like a bullet while removing.. Great.

Holy shit thank you bro

It's too tight, I don't have that much strength

I was going to do this for my chair at work. Sat for a half hour working on it before realizing that I could just use the wheels from the chair I just replaced

Same as other comments, wanted to pop the casters apart to get the hair off instead of growing old trying to pick it out, but was worried about how much force I was having to use. Your vid gave me the confidence to really put some stank on it and sure enough, pop they did. No damage either. Hair removed, and lubricated with some graphite paste, and reassembled. I also used a blade to scrape the wheel surfaces clean, to get rid of the old ball-mouse "roller rumble". Worked great, helped me keep this old chair in service a bit longer.

Yeah as a comment said below I used two spanners and also saw that there was one wheel slightly thinner than the other so that was the one that popped off.

Yaptım oldu teşekkürler

Bro the wheel itslef doesnt fit in the other one💀💀

This was a great starting point for me. All 5 wheels were seized with crud on a used chair I picked up yesterday. Advice for others: -Wear goggles, and anticipate some bits might go flying, at least on your first wheel. -Do this in a space where you can find parts that might suddenly ping off. -Instead of two screwdrivers, I found using two hammers gave more control and leverage (get the tips of the claws as close to the axles as you can, then press the tops of the hammers into each other). -If you're opting for lubrication, I recommend a conservative drop of *3-in-1 silicone oil* wherever plastic/acrylic/nylon meets metal (been using it for years on closet door runners, arcade joystick parts, etc.). Turns out mine has a high-tensile spring perpendicular to the wheel axle, putting pressure on a plastic cartridge with two holes in it, one of which the axle slides through. So as soon as I popped the axle out of place, the cartridge and spring fired out and pinged 4 times off various surfaces in my workroom, and I eventually found the parts with a high-powered torch. imgur.com/a/60WXFxt

Que buena idea!!! 🤩 Yo también limpio mis ruedas de manera similar, si quieres verlo te dejo el vídeo aquí ruclips.net/video/J4zMVdwzvbU/видео.html y sería genial que me des tu opinión, gracias. Un saludo.

Thanks mate

Mission accomplished thanks to your awesome video! Would've spent hours with needle-nose pliers, box knife, etc., OR given up and ordered a new set!! Rollers are as good as new in about 15 minutes!!!😏

Hey man thanks for the video. After watching this video, I cleaned my chairs caster wheels in half an hour!

THANK YOU. My castors wouldn't permit reaching chair leg, but crossing the tips of 2 flat bladed screwdrivers meant I could lever against that.

I've been using a cigarette lighter to burn all the stuck air. Usually outside, cause of the burnt smell. It's not the best solution, but so far no problems, I do it in several passes not to melt the plastic, but one day I'll have to try this..inevitably.

Thank you, Great help, I used after I saw what you were doing some thin open in wrenches, 3/4 till 7/8 will work, much faster than screwdrivers thanks again

I couldn't get my wheels apart without busting the into pieces 😢 I actually still didn't get the wells apart afterwards either... think it would be worth it to drill a small hole in the center of the wheel and punch it out?

Great review, all 3 segments. Your playing was very nice too! Thank you!

Very helpful thank you so much for sharing happy new year🤗🤗💕💕🔔🔔

Excellent tutorial. I was on my way half way through...

From the side of the road, I just picked up a Herman Miller 'Ergon' chair, & the only thing that's wrong with it is that the hair has stopped the wheels rolling! Brilliant video explanation. Thank you!

I just watched this video and it worked thank you so much my wheels needed a clean

Thank you. I was reluctant to try high pressure, for fear of breaking parts. Your explanation was great, through, and extremely helpful. Blessings.

If you have a Titan Gaming Chair this is the video you should watch as the casters are identical. #Titan

Bloody legend. Thanks mate

When everyone else tells me to just replace the damn things, you gave me the courage to actually try and split them apart And I did! And I cleaned them, and they work substantially better now, thank you.

Thank You!😁

Hey dumb question, where can I buy these wheels at? the bottoms of mine snapped off and I've been trying to find where I can buy these exact wheels but all the wheels our stores out here carry are too small and seem to be more metalic and don't fit the chair.

woop woop, this helped, had to fight really hard but got it done :) 👍👍

Use a Silicone based lubricant, not an oil based lubricant. Silicone lubricant won't harm the plastic or rubber wheels.

thanks a bunch dude. just cleaned those nasty wheels following your tutorial.

So thankful!

I just got a free chair that's almost perfect except for a bent hub axle and stuck wheels. was able to fix the axle, but the clogged wheels were stumping me until now. Thanks!

Bro my chair is so much worst and it’s not even a year old 🤣💀

Thank you so much! To add to help anyone else, both wheels should be able to be popped off. Just pick a side and pop it off with your flatheads!

thank you

I needed to reassemble casters and this really helped to see the anatomy of the wheel and the force needed to get it back together, thank you!

Thanks for the video, but this isn't quite what I was looking for and I can't find any videos for it. Can you or someone explain to me how to remove the stem from the top? Or is that even possible, short of destroying the piece?

Very useful.Thanks!

Worked like a charm!